There are various reasons why this issue may arise. It is possible that the candle was poured too quickly, trapping air bubbles in the wax. Another factor could be the candle being placed in a very windy area. The positioning of the candle affects how it burns. If the candle has a cracked surface, it is recommended to pour the wax slowly.
Overpouring wax too quickly can cause air bubbles to become trapped in it
There are many factors that can cause air bubbles in candles, such as cooling wax too quickly or pouring too quickly. Stirring too vigorously is another common cause. Allow the wax to cool down more slowly before pouring. After pouring, tap the container to release air bubbles.
The best way to avoid air bubbles in your candles is to pour them slowly and avoid vigorous stirring. Stirring too fast can result in tiny holes in the wax, which can lead to cracks when setting candles. Pouring too quickly will also cause the wax to cool unevenly, which will cause the candle to crack.
A few simple techniques that can help you prevent cracks in your candles include raising the candle container on a wire cooling rack and adjusting the pour temperature slightly. Do not exceed 125 degrees when pouring. Your pour should not exceed 125 degrees. This will prevent cracks and allow your candles to cool evenly.
Slowly pouring will prevent cracks in your candles. Pouring too quickly can also lead to white frosting, which is caused by the growth of tiny crystals within the wax. It doesn’t affect the quality or smell of your candles. You can experiment with different temperatures until you find the right setting for your homemade candles.
Tunneling occurs when a candle wick consumes too much fuel
Tunneling can happen with any candle. A tunnel is created when the wick consumes too much fuel and it causes the candle to burn less efficiently and with a poor scent throw. This can also cause your candle to go out. It is important to understand the causes of tunneling in your candle if you are concerned.
There are several causes of tunneling. These include irregular burning, incorrect wick size, and premature extinguishing. There are a few simple remedies that can be used to fix tunneling if you can identify the cause. First, change the size of the wick. Make sure that you use a size that will allow the candle to burn from edge to edge.
Tunneling can also occur when a candle wick consumes too little fuel. This is most common with candles with smaller wicks, which can’t melt the wax to the edge. Tunneling can also be caused by candles that were too hot. A larger wick will prevent this problem.
Soy candles can also cause tunneling. Tunneling can also be caused by soy candles. They have a lower melting point that paraffin. If you’re unsure whether your candle is suffering from tunneling, try to change to another type of wax, or burn it at a lower temperature. Tunneling issues can be treated by regularly checking your wick and changing it as necessary.
Fixing a cracked candle’s surface
You can quickly and easily fix a cracked candle’s surface. You can use a heat gun to fill up the hole. You can also use a skewer to release trapped air. While this may seem like a daunting task, it’s actually not that difficult, and it doesn’t take much time. These steps will help you avoid it happening again.
First, remove any air bubbles. Your candle’s surface could crack if there are too many air bubbles. If you live in humid areas, it is a good idea to store your candle in a room that is dehumidified. You can also tap the candle’s container to remove air bubbles.
After you have removed all air bubbles, you can smoothen the surface with a heat gun. You can also use a hairdryer to gently heat the surface. The aim of this procedure is to even out the surface of a crack or hole. You can seal cracks with molten wax once the surface is smooth.
To fill cracks, you can also use leftover wax. If the cracks are too wide, you can pour the extra wax over the surface to fill it. Another option is to coat the container with coconut oil or natural oils. This will prevent the beeswax sticking to the container.
Related Posts:
I’m Amelia, and I love making candles. It all started when I was given a kit as a gift. I loved the process so much that I decided to make my own candles. I soon realized that I had a real talent for it. Before long, my friends and family were asking me to make candles for them too. Word spread, and soon I was inundated with orders. I love the creativity that goes into making each candle unique. And I love the satisfaction of knowing that people are using something I made with my own hands.
