TL;DR
Get decor and gifts delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Hunker reports that DIYer Christina Dennis made a bedside tray by attaching two metallic drawer pulls to a large hexagonal tile with E6000 adhesive. The project offers one use for spare tile, but the source does not independently verify its cost, durability or effect on sleep.
DIYer Christina Dennis used a large hexagonal tile, two metallic drawer pulls and E6000 adhesive to make a bedside tray, according to a project report by Hunker. The idea gives people with spare tile a way to create a small organizer for a nightstand, though the report does not provide independent testing of the finished tray’s strength or longevity.
The tray is intended to corral items kept by the bed, such as a phone or eye mask. Hunker says the tile should be large enough to hold the objects a person regularly leaves on the nightstand, while remaining small enough not to take up the whole surface. The report describes a large hexagonal floor tile as one option, citing porcelain and marble versions that it says may cost less than $4 each at some home improvement stores or tile warehouses.
For assembly, the report instructs makers to apply adhesive to the sides of each cabinet pull and press the pulls onto the tile. Dennis used two pulls as handles, one on either side. Hunker says pulls could instead be added along each side to form a border, but that option requires more hardware and raises the project cost. It advises measuring the tile sides before buying pulls and choosing ones slightly shorter than the edge they will sit against.
Hunker estimates that the supplies bring the project total to around $20. Its listed examples include a small tube of E6000 Clear Adhesive at $4.48 and bar-style cabinet pulls starting at about $5 each at Home Depot. Those are prices reported in the source, not a guaranteed current total; costs can vary by store, tile, pull style and whether materials are already on hand.
A Small Organizer From Spare Materials
The project is a practical reuse idea for people who have leftover tile after a renovation or can obtain a single tile cheaply. Rather than buying a ready-made organizer, makers can combine a tile with cabinet hardware to create a tray sized for their own bedside essentials. The design also makes the organizer’s footprint and appearance depend on the tile and pulls selected.
Hunker connects the idea to a broader household concern: keeping a nightstand less cluttered. It cites research published in the journal Sleep as suggesting clutter may interfere with a good night’s rest. That is a qualified claim, not proof that this particular tray improves sleep. A tray may help group objects, but the source provides no study of the DIY project or evidence that using one changes sleep outcomes.
The article’s value is therefore mainly practical: it offers a relatively simple way to repurpose a material that might otherwise go unused. The stated price is an estimate, and the tray’s usefulness will depend on the tile’s size, the user’s belongings and how securely the handles are attached.
As an affiliate, we earn on qualifying purchases.
How the Tile Tray Is Assembled
The Hunker report presents the project as a small-bedroom storage option, whether the tile comes from a previous bathroom upgrade or is purchased for the craft. It does not describe a complex build: the tile serves as the base, and the cabinet pulls provide handles or, if used on more sides, a low border. The source identifies porcelain, ceramic and marble tile as relevant surfaces for the adhesive it discusses.
Surface condition matters. Hunker says rough tile edges or an abrasive underside could scratch a nightstand. It suggests sanding rough ceramic edges, starting with 60- or 80-grit sandpaper and then moving to 200- or 400-grit for a smoother finish. It also recommends considering small self-adhesive felt pads on the tray’s corners. The report does not give a curing time for the adhesive, so makers should follow the product label before handling or placing weight on the finished piece.
“The remaining supplies will bring the total cost of this project to around $20.”
— Hunker, on the estimated project cost
Durability and Final Cost Are Unverified
The supplied report does not state when the project was completed or provide independent testing of the adhesive bond, the tray’s load capacity or how it holds up with regular use. It also does not specify how long the adhesive must cure, whether the tile should be cleaned or prepared in a particular way, or whether the finished tray can safely hold heavier objects.
The cited supply prices may change, and the estimate depends on the tile and pulls selected. The report’s reference to research on clutter and sleep is limited: it says clutter may affect rest, but does not establish that a bedside tray produces a measurable sleep benefit. Readers should treat the project as a craft and organization suggestion rather than a tested sleep intervention.
Check Fit, Adhesive and Tile Edges
Anyone considering the project should first measure the nightstand and choose a tile with enough room for the items they intend to keep on it. They should measure each edge before purchasing the pulls, inspect the tile for rough surfaces, and check current prices for all materials. Hunker recommends sanding rough ceramic edges and adding felt pads where the tray could contact furniture.
Before using the tray, follow the adhesive maker’s instructions, including any stated curing time, and check that the pulls are firmly attached. The source does not provide a formal load rating, so the tray should not be treated as suitable for heavy or breakable items without confirming its stability. No further project update or testing is included in the supplied report.
Key Questions
What materials does the bedside tray use?
The Hunker project uses a large tile, two cabinet pulls and E6000 adhesive. Optional self-adhesive felt pads can help protect the nightstand, and sanding supplies may be useful if the tile edges are rough.
How much does the project cost?
Hunker estimates the total at around $20, citing a small tube of adhesive at $4.48 and cabinet pulls starting at about $5 each. The estimate is not a guaranteed current price and depends on the tile and hardware chosen.
Can any leftover tile work?
The report says the tile should be large enough for bedside essentials and describes large hexagonal floor tile as one option. Its instructions also discuss porcelain, ceramic and marble; measure the tile and nightstand to check the fit.
How can the tray be made less likely to scratch furniture?
Hunker suggests smoothing rough ceramic edges with progressively finer sandpaper and adding self-adhesive felt pads to the corners. Check both the tile edges and underside before placing it on a nightstand.
Source: rss
Fall Picks
fall essentials
As an affiliate, we earn on qualifying purchases.
